lined_equal_unequal_cross
lined_equal_unequal_cross_line_diagram

Technical Specifications

  • Flange : As per ANSI B16.5 / B 16.42
  • Face to Face : As per ANSI B 16.5 #150
  • Lining Thickness : 3 to 5 mm
  • Other Flange Drillings like, DIN 2632 / 2633, BS 10 Table D, E or F are also available on request.
  • Material
  • Dimensional
  • Test & Inspection

Housing Material Options

  • Ductile Iron GGG40.3 / ASTM A395
  • Cast Steel ASTM A216 Gr.WCB
  • Steel Fabrication – ASTM A106 Gr.B SCH-40 with flanges are as per ASTM A105 / IS 2062.

Lining Material Options

  • FEP – ASTM D 2116
  • PFA – ASTM D 3307
  • PVDF – ASTM D 3322
  • PP – ASTM D 4101
  • HDPE

Dimensional Data

ANSI #150 Flanged
SIZE L (mm) ØC (mm)
DN15-1/2” 65 35
DN20-3/4” 75 43
DN25-1” 89 51
DN40-1 1/2” 102 73
DN50-2” 114 92
DN80-3” 140 127
DN100-4” 165 157
DN150-6” 203 216
DN200-8” 229 270
DN250-10” 279 323
DN300-12” 305 381

Test & Inspection Data

  • Resins are confirming to the requirements of ASTM F1545-97 (2003)
  • Hydraulic Test : 29 Kg/Cm2 After Lining
  • Spark Test : 15 KV D.C After Lining

Technical Information subject to change without notice.