Technical Specifications
- Flange : As per ANSI B16.5 / B 16.42
- Face to Face : As per ANSI B 16.5 #150
- Lining Thickness : 3 to 5 mm
- Other Flange Drillings like, DIN 2632 / 2633, BS 10 Table D, E or F are also available on request.
- Material
- Dimensional
- Test & Inspection
Housing Material Options
- Ductile Iron GGG40.3 / ASTM A395
- Cast Steel ASTM A216 Gr.WCB
- Steel Fabrication – ASTM A234 Gr.WPB with Flanges are as per ASTM A105 / IS 2062.
Lining Material Options
- PTFE – ASTM D 4895
- FEP – ASTM D 2116
- PFA – ASTM D 3307
- PVDF – ASTM D 3322
- PP – ASTM D 4101
- HDPE
Dimensional Data
| ANSI #150 Flanged | ||
| SIZE | L (mm) | ØC (mm) |
| DN15-1/2” | 65 | 35 |
| DN20-3/4” | 75 | 43 |
| DN25-1” | 89 | 51 |
| DN40-1 1/2” | 102 | 73 |
| DN50-2” | 114 | 92 |
| DN80-3” | 140 | 127 |
| DN100-4” | 165 | 157 |
| DN150-6” | 203 | 216 |
| DN200-8” | 229 | 270 |
| DN250-10” | 279 | 323 |
| DN300-12” | 305 | 381 |
Test & Inspection Data
- Resins are confirming to the requirements of ASTM F1545-97 (2003)
- Hydraulic Test : 29 Kg/Cm2 After Lining
- Spark Test : 15 KV D.C After Lining
Technical Information subject to change without notice.
Connect with Us