lined_eccentric_reducer
lined_eccentric_reducer_line_diagram

Design Specifications

  • Flange : As per ANSI B16.5 / B 16.42
  • Face to Face : As per ANSI B 16.5 #150
  • Lining Thickness : 3 to 5 mm
  • Other Flange Drillings like, DIN 2632 / 2633, BS 10 Table D, E or F are also available on request.
  • Material
  • Dimensional
  • Test & Inspection

Housing Material Options

  • ASTM A234 GR. WPB
  • Cast Steel ASTM A216
  • Gr.WCB

Lining Material Options

  • PTFE – ASTM D 4895
  • FEP – ASTM D 2116
  • PFA – ASTM D 3307
  • PVDF – ASTM D 3322
  • PP – ASTM D 4101
  • HDPE

Dimensional Data

Major Size Minor Size (mm) L

(mm)

 K

(mm)

 R.F (mm)
ØA ØB
DN25-1” DN15 114 - 51 35
DN40-1 ½” DN25 114 - 73 51
DN50-2” DN25 127 - 92 51
DN50-2” DN40 127 - 92 73
DN80-3” DN25 152 - 127 51
DN80-3” DN40 152 19 127 73
DN80-3” DN50 152 13 127 92
Major Size (mm) Minor Size (mm) L

(mm)

 K

(mm)

 R.F (mm)
ØA ØB
DN100-4” DN25 178 - 157 51
DN100-4” DN40 178 - 157 73
DN100-4” DN50 178 25 157 92
DN100-4” DN80 178 13 157 127
DN150-6” DN50 229 - 216 92
DN150-6” DN80 229 38 216 127
DN150-6” DN100 229 25 216 157
DN200-8” DN100 279 51 270 157
DN200-8” DN150 279 25 270 216
DN250-10” DN150 305 - 324 216
DN250-10” DN200 305 - 324 270

Test & Inspection Data

  • Resins are confirming to the requirements of ASTM F1545-97 (2003)
  • Hydraulic Test : 29 Kg/Cm2 After Lining
  • Spark Test : 15 KV D.C After Lining

Technical Information subject to change without notice.